Ebode IPV38WE Manual do Utilizador descarregar pdf (Página 13)

March 2013 IPV38 / IPV38WE

1.7.1 Six Options Available

Choose the IP Camera and Click the right mouse button on that camera, there are six options: (Figure

2.0).

Basic Properties, Network Configuration, Upgrade Firmware, Refresh Camera List, Flush Arp

Buffer, About IP Camera Tool.

Figure 2.0

1.7.2 Basic Properties

There is some device information in the Basic Properties, such as Device ID, System Firmware

Version, and Web UI Version.（Figure 2.1).

The Device ID is the camera’s MAC ID, which should be the same as shown on the sticker on the bottom

of the camera. Every camera has a unique MAC ID. So if there are many IP addresses shown in the list,

check the MAC ID on the bottom of the camera, so you can ensure which camera you are looking for.

Sometimes, if there is no IP address shown on the IP Camera tool, it could be blocked by a firewall, in this

case you need to add the MAC ID to the router, and give it a fixed IP or add the MAC ID as a trusted site.

There are two MAC Addresses, one is the Device MAC ID, the other is the WIFI MAC ID.

WIFI MAC ID, you can find it on the sticker on the bottom of the camera, you can also login to your WIFI

router, check the host status, which will show all the WIFI devices connected to your router, you can also

find the IPCAM’s WIFI MAC ID there.

Figure 2.1

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 75 76

Sem comentários

Ebode IPV38WE Manual do Utilizador Página 13