
March 2013 IPV38 / IPV38WE
How to register an account from DDNS web
You can enter http://www.dyndns.com and register an account.
Pop-up the prompt” Fail to connect to the device…”?
This prompt only appears in the case of using multiple cameras.
When you set multiple cameras, and the device status light changes to yellow please make sure the
cameras are connected to power and working correctly.
5.2 Default Parameters
Default network Parameters
IP address: dynamic
Subnet mask: dynamic
Gateway: dynamic
DHCP: Disabled
DDNS: factory DDNS and third party DDNS
Username and password
Default administrator username: admin
Default administrator password: None, i.e., no password, please leave blank
6.0 Specifications
IP Vision 38 (IPV38) / IP Vision 38 WideEye (IPV38WE)
640 x 480 Pixels (300k Pixels)
IPV38 – f: 6.0mm, F 2.0 IPV38WE – f: 3.6mm, F 2.0
IPV38 – 60 Degree IPV38WE – 90 Degree
640 x 480(VGA), 320 x 240(QVGA)
10Base-T/100Base-TX Ethernet Port
TCP/IP,DHCP,SMTP,HTTP,DDNS,UPNP,PPPoE, FTP, DNS, UDP, GPRS
Supports wireless networks (Wi-Fi/802.11/b/g)
Disable / 64 bit / 128 bit
Comentários a estes Manuais